$2,558.73
$2,481.97
Tax included
Previous
Next
Share
Free Delivery in India | Lowest Global Shipping Charges
24/7 Customer Support
Shop with confidence knowing that our 24/7 Customer Support is always available to assist with any inquiries
Save up to 28% with GST Input
Avail maximum benefits from input tax mechanism on all your Business Invoices. Get GST Invoices on your business purchases. And 0% Taxes on all worldwide deliveries
# Lowest Price Challenge
If you find this product anywhere at lower cost than us. Call us and we will not only match the price but also give a complimentary coupon
100% Original Products
Shop with assurance, as each product we offer is 100% original, ensuring quality and authenticity with every purchase
Testec Active Differential Oscilloscope Probe 100 MHz, 1:100 / 1:1000 Attenuation, BNC Connector TT-SI 8110
Specifications
| Country of Origin | China |
|---|---|
| DC Accuracy | ±2% |
| Attenuation Ratio | x100 / x1000 |
| Brand | Testec |
| Model | TT-SI 8110 |
| Connector Type | BNC |
| Bandwidth | 100MHz |
| Safety Standard | IEC61010-031: 2015 |
| Series | 8000 |
| Probe type | Differential |
| Interfaces | USB power cord |
| Rise Time | 5ns |
| Attenuation | 1:100 / 1:1000 |
| Number of Probes | 1 |
| Standards/Approvals | RoHS |
| Safety Category Level | CAT III |
| Safety Category Voltage | 600V |
| Maximum Common Mode Input Voltage | 2800V ac/dc |
| Differential mode | ±280V (DC + AC Peak) @ x100 |
| Common mode | ±2800V (DC + Peak AC) |
| Each side to ground | 600Vrms CAT III / 1000Vrms CAT II |
| Attenuation 1 | 100 / 1:1000 |
| Testec Oscilloscope ProbeBrand | Testec |
| Testec 8000 Series TT-SI 8110 Oscilloscope Probe, Differential Type, 100 MHz, 1 | 100 / 1:1000, BNC Connector |
Key Features
- Equipped with a BNC connector for compatibility with standard oscilloscopes.
- Supports measurements of up to ±2800 V common mode input voltage with CAT III safety rating.
- Includes an extensive accessory set such as test leads, clips, USB power cord, and factory calibration certificate.
- Suitable for use with grounded oscilloscopes providing 1 MΩ input impedance.
- Provides a rise time of approximately 3.5 ns for fast transient signal capture.
- Supplied in a robust hard case for protection and portability.
- Ideal for precise differential voltage measurements in industrial and laboratory settings.
Product Description
The Testec TT-SI 8110 is an active differential oscilloscope probe with a bandwidth of 100 MHz, suited for precise and safe high-voltage differential voltage measurements. This probe supports attenuation ratios of 1:100 and 1:1000, allowing for flexible measurement scaling across a wide range of signal amplitudes.
Featuring a BNC connector, it can be connected to oscilloscopes from various manufacturers with grounded 1 MΩ inputs, enhancing its compatibility in diverse laboratory and industrial environments.
Designed to measure voltage differentials up to ±280 V at 1:100 attenuation and ±2800 V at 1:1000 attenuation in differential mode, it also maintains safety compliance with IEC61010-031: 2015 standards and CAT III 600 V safety category level, providing secure operation in demanding applications.
The rise time is approximately 3.5 ns, facilitating accurate capture of fast transient signals.
This probe is powered via USB with included power cord and comes supplied in a hard case along with two test leads with insulated banana plugs, hook clips, pincer hook clips, crocodile clips, an insulated 100 cm BNC test lead, a power adapter (EU version), a factory calibration certificate, and a user manual.
The probe's differential measurement capability makes it ideal for industrial, laboratory, and electronics testing applications. Comprehensive accessories ensure ready-to-use deployment in varied testing scenarios. Provides high common mode rejection ratio enabling precise signal integrity.
Explore the extensive range of Testec Oscilloscope Probes in EnvMart for your measurement and testing needs.
Looking to purchase in bulk?
- Purchase item in bulk quantity
- Get best price for your business
Frequently Asked Questions
The bandwidth of this model is 100 MHz, making it suitable for a wide range of measurement applications.
It supports attenuation ratios of 1:100 and 1:1000, allowing for flexible measurement scaling.
The maximum common mode input voltage is ±2800 V, which is suitable for high-voltage applications.
This model complies with IEC61010-031: 2015 standards and is rated for CAT III 600 V safety category.
The rise time is approximately 5 ns, enabling accurate capture of fast transient signals.
It features a BNC connector, allowing compatibility with standard oscilloscopes that have a 1 MΩ input impedance.
The probe comes with test leads, clips, a USB power cord, a power adapter (EU version), and a factory calibration certificate.
The DC accuracy of the TT-SI 8110 is ±2%, which is important for precise measurements.
The specific dimensions and weight are not provided in the product details.
It is suitable for precise differential voltage measurements in industrial and laboratory settings.
This model is designed for use with grounded oscilloscopes providing a 1 MΩ input impedance.
Each side to ground is rated at 600 Vrms for CAT III and 1000 Vrms for CAT II applications.
Related Products
$10,307.98
$9,998.74
-3%
New
$1,755.27
$1,702.61
-3%
New
$1,335.81
$1,295.74
-3%
New
$1,273.13
$1,234.94
-3%
New
$4,134.77
$4,010.73
-3%
New
Other Products from this brand
$1,335.81
$1,295.74
-3%
New
Recently Viewed Products
$1,291.53
$1,252.78
-3%
New
$2,558.73
$2,481.97
Save 3%
Tax included
Quantity
Global Payments 140+ Countries
Global Shipping Fedex/UPS/DHL/Aramex/
BlueDart/Delhivery/DP World
24/7 Customer Support Email/Chat/Telephonic Support
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent