$2,663.86
$2,397.47
Tax included
Previous
Next
Share
Free Delivery in India | Lowest Global Shipping Charges
24/7 Customer Support
Shop with confidence knowing that our 24/7 Customer Support is always available to assist with any inquiries
Save up to 28% with GST Input
Avail maximum benefits from input tax mechanism on all your Business Invoices. Get GST Invoices on your business purchases. And 0% Taxes on all worldwide deliveries
# Lowest Price Challenge
If you find this product anywhere at lower cost than us. Call us and we will not only match the price but also give a complimentary coupon
100% Original Products
Shop with assurance, as each product we offer is 100% original, ensuring quality and authenticity with every purchase
RIGOL Spectrum Analyzer DSA800 Series
Model
Frequency Range
Resolution Bandwidth
Phase Noise
Specifications
| Country of Origin | India |
|---|---|
| Measurement Range | DANL to +20 dBm |
| Display | 8-inch WVGA (800 x 480) |
| Frequency range | 9 kHz to 7.5 GHz (model dependent) |
| Brand | Rigol |
| Connectivity | LAN (LXI), USB Host/Device, Optional USB-GPIB |
| Temperature Stability | Less than 0.5 ppm (model dependent) |
| Series | DSA800 |
| Input Impedance | 50 Ω |
| Sweep Time | 1 ms to 1500 s (span ≥100 Hz); 20 μs to 7500 s (zero span) |
| Frequency Resolution | 1 Hz |
| Product Condition | New |
| Resolution Bandwidth (RBW) | 10 Hz to 1 MHz (1-3-10 sequence) |
| Video Bandwidth (VBW) | 1 Hz to 3 MHz |
| Phase Noise | Less than -98 dBc/Hz @ 10 kHz offset (model dependent) |
| Displayed Average Noise Level (DANL) | down to -161 dBm typ. (5 MHz to 3.2 GHz, with preamplifier on) |
| Reference Level Range | -100 dBm to +20 dBm |
| Level Measurement Uncertainty | Less than 0.8 dB nom. |
| Reference Frequency | 10 MHz |
| Frequency Span | 0 Hz, 100 Hz to max frequency |
| Initial Calibration Accuracy | Less than 1 ppm |
| Aging Rate | Less than 1 ppm/year (model dependent) |
| EMI Bandwidth | 200 Hz, 9 kHz, 120 kHz |
| Absolute Amplitude Uncertainty | Less than 0.3 dB typ. (model dependent) |
| Log Scale Resolution | 0.01 dB |
| RF Input VSWR | Less than 1.5 (300 kHz to 1.5 GHz), Less than 1.8 up to 7.5 GHz |
| Third-Order Intercept (TOI) | up to +15 dBm typ. (model dependent) |
| Second Harmonic Intercept (SHI) | up to +45 dBm |
| Max Input Level | +20 dBm (100 mW) |
| Max Damage Level | +30 dBm (1 W) |
| Sweep Modes | Continuous, Single |
Key Features
Rigol DSA800 Series spectrum analyzer for advanced RF and EMI signal measurements up to 7.5 GHz.
- Wide frequency range from 9 kHz to 7.5 GHz (model dependent).
- All-Digital IF technology provides excellent measurement accuracy and phase noise performance.
- Displayed Average Noise Level (DANL) down to -161 dBm typical with preamplifier on.
- 8-inch WVGA (800×480) display offers clear, detailed graphical readout.
- Minimum resolution bandwidth as low as 10 Hz and video bandwidth down to 1 Hz.
- Phase noise performance less than -98 dBc/Hz at 10 kHz offset.
- Measurement accuracy typically better than 0.8 dB and absolute amplitude uncertainty less than 0.3 dB on supported models.
- Optional tracking generator, EMI filter and advanced measurement kits available depending on variant.
- Robust input protection with maximum input level of +20 dBm (100 mW) and damage level up to +30 dBm (1 W).
- Connectivity ports include LAN (LXI), USB host and device; optional USB-GPIB adapter.
Product Description
Rigol DSA800 Series, a compact and high-performance spectrum analyzer, is designed for precise RF, signal analysis, EMI diagnostics, and versatile educational or laboratory measurement applications. Covering frequencies from 9 kHz up to 7.5 GHz (model dependent), this analyzer employs advanced All-Digital IF technology to deliver sharp frequency resolution, extremely low displayed average noise level (DANL) down to -161 dBm typical, and outstanding measurement accuracy better than 0.8 dB. The 8-inch WVGA display (800 × 480) ensures crystal-clear, detailed readings for a wide range of test scenarios.
- Frequency range of 9 kHz to 7.5 GHz (check variant specifications).
- Resolution bandwidth from 10 Hz to 1 MHz, 1-3-10 sequence; video bandwidth 1 Hz to 3 MHz.
- Displayed Average Noise Level (DANL) as low as -161 dBm using the preamplifier.
- Model-specific phase noise performance better than -98 dBc/Hz at 10 kHz offset.
- Absolute amplitude uncertainty under 0.3 dB typical and level measurement uncertainty under 0.8 dB.
- Reference frequency: 10 MHz; initial calibration accuracy under 1 ppm.
- Optional tracking generator, EMI filter and quasi-peak detector kit for EMC compliance testing.
- Compact footprint and lightweight build suited for benchtop laboratory and portable field use.
- LAN, LXI, USB host/device, and optional USB-GPIB connectivity for modern laboratory integration.
- Maximum input protection: up to +20 dBm (100 mW), damage resistance to +30 dBm (1 W), input impedance 50 Ω.
- Sweep time: 1 ms to 1500 s (span ≥100 Hz), 20 μs to 7500 s (zero span), continuous/single sweep modes.
Ideal for industrial, laboratory, electronic manufacturing, research, quality control, education, and RF conformance or EMI pre-compliance environments. Discover more Rigol spectrum analyzers and RF testing solutions in the EnvMart Measuring & Testing Instruments category.
Looking to purchase in bulk?
- Purchase item in bulk quantity
- Get best price for your business
Frequently Asked Questions
The Rigol DSA800 Spectrum Analyzer has a frequency range from 9 kHz to 7.5 GHz, depending on the specific model.
The displayed average noise level (DANL) can be as low as -161 dBm when using the preamplifier.
It features an 8-inch WVGA display with a resolution of 800 x 480 pixels for clear and detailed graphical readouts.
The minimum resolution bandwidth (RBW) is as low as 10 Hz.
The measurement accuracy is typically better than 0.8 dB, with absolute amplitude uncertainty less than 0.3 dB on supported models.
It includes LAN (LXI), USB host and device ports, and an optional USB-GPIB adapter for modern laboratory integration.
The maximum input level is +20 dBm (100 mW), and it can withstand damage up to +30 dBm (1 W).
Sweep times range from 1 ms to 1500 s for spans of 100 Hz and above, and from 20 μs to 7500 s for zero spans.
Yes, its compact footprint and lightweight design make it suitable for both benchtop laboratory and portable field use.
Optional features include a tracking generator, EMI filter, and advanced measurement kits depending on the variant.
Related Products
Other Products from this brand
Recently Viewed Products
$2,663.86
$2,397.47
Save 10%
Tax included
Quantity
-
100% Original & Genuine Products with Manufacturers Warranty
-
24/7 Customer Support Email/Chat/Telephonic Support
-
Fastest Global Shipping Fedex/UPS/DHL/Aramex/BlueDart/Delhivery
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent