$27.37
Tax included
Previous
Next
Share
Free Delivery in India | Lowest Global Shipping Charges
24/7 Customer Support
Shop with confidence knowing that our 24/7 Customer Support is always available to assist with any inquiries
Save up to 28% with GST Input
Avail maximum benefits from input tax mechanism on all your Business Invoices. Get GST Invoices on your business purchases. And 0% Taxes on all worldwide deliveries
# Lowest Price Challenge
If you find this product anywhere at lower cost than us. Call us and we will not only match the price but also give a complimentary coupon
100% Original Products
Shop with assurance, as each product we offer is 100% original, ensuring quality and authenticity with every purchase
Loop Powered Sensors Transmitter 4-20 mA
Specifications
| Range | 50g peak |
|---|---|
| Operating Temperature Range | -25 to 90oC |
| Supply Voltage (V) | 15-30 Volts DC (for 4-20mA) |
| Current Output | 4-20mA DC proportional to Velocity Range |
| Weight | 150gms (nominal) |
| Frequency response | 10Hz (600cpm) to 1kHz (60kcpm) 5% - ISO10816 |
| Case Material | Stainless Steel |
| Standard Cable Length | 5 metres |
| Output Impedance | Loop Resistance 600 Ohms max. at 24 Volts |
| Isolation | Base isolated |
| Sealing | IP65 |
| Mounted Base Resonance | 5kHz min |
| Velocity Ranges | Nominal 80Hz at 22oC |
| Transverse Sensitivity | Less than 5% |
| Sensing Element/Construction | PZT/Compression |
| Mounting Torque | 8Nm |
| Maximum Cable Length | 1000 metres |
| Screened Cable | Braided - length to be specified with order |
| Settling Time | 2 seconds |
| Case Isolation | Greater Than 108 Ohms at 500 Volts |
| Maximum Shock | 5000g |
| EMC | EN61326-1 2013 |
Key Features
- For use with PLC/DCS systemsCustomisable features
Product Description
The 4-20mA sensor is a combination of an accelerometer and a transmitter in one housing. Each sensor provides an output signal of 4-20mA, which is proportional to the total vibration level in terms of acceleration, velocity, or temperature. You can connect 4-20mA sensors directly to process control systems such as PLC, DCS and SCADA systems to create cost effective and effective continuous monitoring systems.
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent