Fluke Handheld Pressure Calibrator 2 bar Maximum Pressure Measurement -0.8 bar Minimum Pressure FLK-719PRO-30G/APAC

Fluke FLK-719PRO-30G/APAC handheld pressure calibrator is designed for precise field calibration of pressure transmitters, switches, and gauges. This battery-powered instrument combines on-board pressure generation with mA sourcing, simulation, and measurement, supporting maintenance and commissioning tasks in automation, electrical, and mechanical settings. It delivers ±0.025% full-scale accuracy over a range from -0.8 bar to 2 bar with a fine resolution of 0.0001 bar.

The integrated electric pump provides pressure up to 20 bar, covering a broad array of testing needs. Programmable pump limits ensure safe operation during setpoint tests, preventing over-pressurisation. The device supports current loop measurements and sourcing, enabling loop checks and device simulation with standard banana jacks that accommodate a 1000 ohm maximum load and 24V loop supply capacity.

Featuring an LCD backlight display, it assures clear readings in variable light conditions. The unit runs on AA alkaline batteries and can perform approximately 300 pump cycles per battery set, enabling extended field operations. Its operating temperature spans -10°C to 50°C, maintaining accuracy unaffected between 15°C and 35°C, with temperature compensation outside this band.

This calibrator is ideal for use in process plants, industrial automation, and electrical commissioning where portable, high-accuracy pressure calibration and loop simulation are required. It is intended for dry air and non-corrosive gases; a fluid trap and pump cleanout ports reduce moisture and debris risks.

The product is supplied complete with test leads with alligator clips, an accessory hose kit featuring two 1/8 inch quick-fit adapters and 1m of hose, a liquid and dirt trap, soft carrying case, and a manual provided on CD-ROM.

Fluke products are widely used in industrial, manufacturing, HVAC, laboratory, and water treatment sectors for reliable and precise pressure calibration tasks. Features 0.0001 bar resolution for highly accurate pressure adjustments.

Powered by AA alkaline batteries with approximately 300 pump cycles. Includes LCD backlight display for clear readings. Supports current loop measurement and sourcing. Operating temperature range from -10°C to 50°C. Compact and lightweight at 1.2 kg for portability.

Integrated electric pump up to 20 bar capacity. Programmable pump limit for safety during operation. Suitable for calibrating pressure transmitters, switches, and gauges. Complete with test leads, hose kit, fluid trap, soft case, and manual.

Explore the full range of Fluke Pressure Calibrators and measuring instruments on EnvMart for industrial-grade quality and reliability.