Share
Free Delivery in India | Lowest Global Shipping Charges
24/7 Customer Support
24/7 Customer Support

Shop with confidence knowing that our 24/7 Customer Support is always available to assist with any inquiries

24/7 Customer Support
Save up to 28% with GST Input

Avail maximum benefits from input tax mechanism on all your Business Invoices. Get GST Invoices on your business purchases. And 0% Taxes on all worldwide deliveries

Lowest Price Challenge
# Lowest Price Challenge

If you find this product anywhere at lower cost than us. Call us and we will not only match the price but also give a complimentary coupon

Lowest Price Challenge
100% Original Products

Shop with assurance, as each product we offer is 100% original, ensuring quality and authenticity with every purchase

Fluke Documenting Process Calibrator 753 with Multi-function Measurement and Calibration Capabilities FLUKE753

Category Process Calibrators Brand FLUKE Condition New

Specifications

Country of Origin India
Accuracy 10%, 18 V minimum at 22 mA
Size 136 x 245 x 63 mm (5.4 x 9.6 x 2.5 in)
Brand Fluke
Operating Temperature -10°C to +50°C
Storage Temperature -20°C to +60°C
Gross Weight 1.2 kg
Batteries Internal Battery Pack Li-ion: 7.2 V, 4400 mAh, 30 Wh
Rate 4 steps/second
Interfaces USB communication cable
Maximum Current 25 mA, short circuit protected
Maximum Input Voltage 50 V DC
Operating Altitude 3000 m above mean sea level (9842 ft)
Models Fluke 753 Documenting Process Calibrator
Maximum Record Length 8000 readings (7980 for 30 or 60 readings/minute)
Compatible Accessories Fluke 753 Documenting Process Calibrator
110.1 to 1100.0 Hz / 0.1 Hz 0.5 Hz
1.101 to 11.000 kHz / 0.001 kHz 0.005 kHz
11.01 to 50.00 kHz / 0.01 kHz 0.05 kHz
1 year 2 year
0.01 to 10.99 Hz 0.01 Hz
11.00 to 109.99 Hz 0.1 Hz
1.100 to 21.999 kHz 0.002 kHz
22.000 to 50.000 kHz 0.005 kHz
Trip detect Continuity or voltage (continuity detection not available when sourcing current)
Autostep Fully programmable for function, start delay, stepvalue, time per step, repeat
Dust/water resistance Meets IP52, IEC 529
Side port connections Pressure module connector
90 day specifications The standard specification interval for the 750 Series are 1 and 2 years
When I can send my calibrator to be calibrated (NIST traceable)Asked by Bogdan
Asked by Bogdan
100.000 mV 0.02% + 0.005 mV
3.00000 V 0.02% + 0.00005 V
300.00 V 0.05% + 0.05 V
30.00 V (40 Hz to 500 Hz) / 0.01 V 0.5% + 0.02 V
110.00 mA 0.01% + 20 uA
100.00 Ω 0.01% + 20 mΩ
1.0000 kΩ 0.02% + 0.2 Ω
1.00000 V 0.01% + 0.00005 V
15.0000 V 0.01% + 0.0005 V
Current sink (simulate) 0.02% + 0.007 mA
Ramp functions Source functions
Step functions Source functions
Degrees or % of reading - Type (α) Range °C
Source current Source °C
Product overview Fluke 753 Documenting Process Calibrator
BatteriesInternal Battery Pack Li-ion 7.2 V, 4400 mAh, 30 Wh
Manuals + resources Fluke 753 Documenting Process Calibrator

Key Features

  • Measures volts, milliamps, RTDs, thermocouples, frequency, and resistance accurately.
  • Sources and simulates various signals including volts, milliamps, pressure, and thermocouples.
  • Powers transmitters during testing with loop supply and simultaneous milliamp measurement.
  • Data logging capability stores up to 8000 readings for detailed calibration records.
  • IP52-rated dust and water resistance suitable for harsh industrial environments.
  • USB communication interface for easy connectivity and data transfer.
  • Internal 7.2 V Li-ion battery provides over 8 hours of typical operation.
  • Compact size and lightweight design enhances portability in the field.

Product Description

Fluke FLUKE753 documenting process calibrator is a versatile industrial tool designed for precise calibration and troubleshooting of sensors, transmitters, and process instrumentation. It combines measurement and simulation of electrical and physical parameters to provide comprehensive process calibration in demanding industrial environments.

The calibrator measures electrical signals including volts, milliamps, resistance, frequency, as well as temperature sensor outputs such as RTDs and thermocouples. It also sources these signals, enabling complete testing and calibration of field devices.

Equipped with a loop supply, the FLUKE753 powers transmitters during testing while simultaneously measuring the current, facilitating efficient onsite verification without interruption.

The unit supports data logging of up to 8000 readings with flexible reading rates, allowing technicians to document calibration processes and maintain quality control records.

Its durable IP52-rated enclosure protects against dust and water ingress, suitable for use in industrial, manufacturing, HVAC, and laboratory calibration applications. The device operates within a temperature range from -10°C to +50°C and at altitudes up to 3000 m, accommodating diverse field conditions.

The internal Li-ion battery pack provides reliable power for more than 8 hours of typical use, ensuring long operational periods in remote locations. USB connectivity facilitates data transfer and integration with calibration management software.

Dimensions of 136 x 245 x 63 mm and a weight of 1.2 kg make the calibrator portable and manageable for field engineers and technicians. The FLUKE753 meets several international regulatory and safety approvals, including CAN/CSA C22.2, ANSI/ISA S82.01, UL3111, and EN610-1, ensuring compliance and safe operation.

Measures and sources volts, milliamps, RTDs, thermocouples, frequency, and resistance for comprehensive process calibration. Loop supply powers transmitters with simultaneous milliamp measurement during testing. Data logging supports up to 8000 readings aiding documentation and quality control.

Robust IP52 dust and water resistance suitable for industrial and laboratory environments. USB interface for seamless communication and data management. Internal 7.2 V Li-ion battery pack offers over 8 hours of typical operation.

Compact and lightweight for portability across various field locations. Wide operating temperature range from -10°C to +50°C and altitudes up to 3000 m. Complies with major international agency approvals for safety and reliability.

Explore EnvMart’s extensive catalog of Process Calibrators and instrumentation tools for reliable calibration solutions that meet industrial and laboratory needs.

Fluke Documenting Process Calibrator 753 with Multi-function Measurement and Calibration Capabilities FLUKE753
Looking to purchase in bulk?
  • Purchase item in bulk quantity
  • Get best price for your business

Comments (0)

No customer reviews for the moment.

Related Products

Other Products from this brand

$8,941.30
$8,673.06 Save 3%
Tax included
Quantity
Delivery Time Delivered within 0-3 days
  • Global Payments 140+ CountriesGlobal Payments 140+ Countries
  • Global Shipping Fedex/UPS/DHL/Aramex/
BlueDart/Delhivery/DP WorldGlobal Shipping Fedex/UPS/DHL/Aramex/ BlueDart/Delhivery/DP World
  • 24/7 Customer Support Email/Chat/Telephonic Support24/7 Customer Support Email/Chat/Telephonic Support
$8,941.30
$8,673.06
Tax included