Microchip Atmel-ICE Chip Programmer Programming Kit for SAM and Atmel AVR Microcontrollers ATATMEL-ICE-BASIC

Microchip ATATMEL-ICE-BASIC is a versatile chip programmer and debugger designed for use with SAM and Atmel AVR Microcontrollers, featuring ARM Cortex-M core architectures with on-chip debug capabilities. This basic programming kit includes the Atmel-ICE unit, a high-speed 1.8m Micro-B USB cable, and a DC flat cable with both 10-pin 50-mil and 6-pin 100-mil connectors, enabling a broad range of connection options.

The Atmel-ICE supports programming and debugging for multiple Atmel microcontroller families: AVR UC3 via JTAG and aWire interfaces, AVR XMEGA on JTAG and PDI 2-wire interfaces, AVR 8-bit microcontrollers with OCD support on JTAG or debugWIRE, and SAM ARM Cortex-M microcontrollers through SWD and JTAG protocols. It operates via a USB 2.0 compliant controller with full-speed and high-speed modes, powered directly from the USB bus voltage with consumption under 100mA, allowing it to be powered through USB hubs. The power LED confirms active connection status.

For use, it requires Atmel Studio 6.2 or later on the host computer. The device communicates using a standard HID interface, eliminating the need for special drivers. The rugged plastic enclosure is designed for durability but can be opened carefully with anti-static precautions if necessary by releasing snap-fit tabs on the blue belt.

The kit is ideally suited for industrial electronics development, embedded system programming, and microcontroller debugging applications. It supports efficient development workflows for embedded system engineers working with Atmel microcontrollers.

Supports ARM Cortex-M and Atmel AVR microcontrollers debugging and programming. Includes USB and DC flat cables for flexible interface connections. Compatible with Atmel Studio 6.2 or later software. Standard HID communication for driverless USB interface.

USB powered with low consumption and power LED indication. Durable plastic enclosure with snap-fit design. Suitable for development, debugging, and programming in embedded systems. Developed for use with a wide range of Atmel microcontroller interfaces including JTAG, aWire, SWD, and debugWIRE.

The set contains Atmel-ICE unit, USB cable, and DC flat cable with multiple connectors. It is produced in China and provided new for immediate use in semiconductor development environments. Explore our comprehensive range of chip programmers and development tools at EnvMart for your electronics development needs.

Explore more products in our Chip Programmers & Debuggers category.