The product adopts a good sensitivity detector and integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from humans as the control-signal source, it can start the load at once when one enters the detection field. It can identify day and night automatically. It is easy to install and is used widely.Function Identify day and night automatically. Can adjust ambient light according to your desire: when turn to SUN (max), it will work in the daytime and at night. When turning to MOON (min), it will only work under less than 3LUX circumstances. As for Adjustment, please refer to the testing way. Time delay is added continually: when it receives the second induction signal after the first inductor, it will compute time once more on the rest of the first time-delay basic (Set time) .Time-delay adjustment: it can be set according to your desire. The minimum is 103 sec; the maximum is 72min.Installation:Turn off the power. Moving the transparent vinyl cover that is at the bottom of the sensor. Loosing the screws in the connection terminal, connecting the power and rated load to the connection terminal of the sensor according to the connection sketch map. Tighten the screws; put the transparent vinyl cover into the original station. Fold the metal spring of the sensor upwards, until they are in the "I" position with the sensor, then put the sensor into the hole or installation box that is in the ceiling, the size is similar to the item. Releasing the spring, the sensor will be set in this installation position. After finishing the installation, the sensor could be connected to the power and testing it.

• High Durability
• Easy installation