AMS Trex Device Communicator Commission and validate devices faster Automatically synchronize field changes with AMS Device Manager Quickly fix issues in the field with advanced device diagnostics Configure and test valves inline Improve efficiency with a modern, intuitive userinterface Intrinsically safe; usable anywhere you need to goSpecifications Processor, Memory, and Operating System Microprocessor 800 MHz ARM Cortex A8 / NXP Memory Internal Flash 2 GB NAND and 32 GB extended flash Operating System Windows Embedded Compact 2013 RAM 512 MB DDR3 SDRAM Physical Weight Approximately 2.9 lbs (1330 grams) Display 5.7 inch (14.5 cm) color VGA resistive touchscreen 640 x 480 pixel Keypad X button similar to a Back key 4 arrow buttons to navigate menus Checkmark- similar to an Enter key AC Adapter Battery Rechargeable Lithium- Ion Power Module Operating Time 8+ hours of typical use Charge Time 3 to 4 hours LEDs 6 LEDs. Five LEDs for indicating the progress of charging. One LED to indicate the AC adapter is charging the power module. Battery Charger Options Input voltage 90-264 VAC, 47-63 Hz Cables included with US, EU, UK, and AU plugs trex 5 AMS Trex Device Communicator October 2017 Connections USB Micro USB Connector. USB 2.0 Remove the USB cable from the Trex unit before connecting to a device. Battery Charger Barrel Round Plug Tip Wireless Wireless Approvals FCC, CE, RED and IC Approvals Certified for use in over 100 countries Bluetooth 2.1 Range up to 10 m Wi-Fi 802.11 b/g Range up to 33 m NFC Active NFC Range up to 20 mm Communication Modules Device Communicator Communication Module HART terminal Enables HART device communication Connectors: Two Banana Jack Plugs Optional Internal Resistor: 250 or 500 Ohm Fieldbus (FF) terminal Enables Foundation Fieldbus device communication Connectors: Two Banana Jack Plugs Device Communicator Plus Communication Module HART terminal Enables HART device communication Connectors: Two Banana Jack Plugs Optional Internal Resistor: 250 or 500 Ohm HART + pwr terminal Enables HART communication with the Trex unit, and provides power to one HART device in a bench setup. Connectors: Two Banana Jack Plugs Includes HART power supply, resistors (167 Ohm), current control, and ammeter. Current Range: 3 -22.5 mA mA terminal (external ammeter) Measures current on a 4-20 mA current loop. Connectors: Two Banana Jack Plugs Current Range: Up to 22.5 mA Resolution: 0.1 mA Fieldbus (FF) terminal Enables Foundation Fieldbus device communication Connectors: Two Banana Jack Plugs FF + FF pwr terminal Provides power to one Foundation Fieldbus device in a bench setup. Connector: One Banana Jack Plug ( Power conditioner included) Current Range: 0- 38 mA /trex 6 AMS Trex Device Communicator October 2017 Environmental Usage -20C to +55C (-4F to 131F). For IS approval: -20C to +50C (-4F to 122F) Charge +10C to +45C (50F to 113F) Storage with power module -20C to +50C (-4F to 122F) (less than 1 month) Storage without power module -20C to +60C (-4 F to 140F) Enclosure Rating IP54 Shock The unit shall survive a 1-meter, all sides and corners drop test onto

• High Durability