$2,080.65
$1,421.50
Tax included
Previous
Next
Share
Free Delivery in India | Lowest Global Shipping Charges
24/7 Customer Support
Shop with confidence knowing that our 24/7 Customer Support is always available to assist with any inquiries
Save up to 28% with GST Input
Avail maximum benefits from input tax mechanism on all your Business Invoices. Get GST Invoices on your business purchases. And 0% Taxes on all worldwide deliveries
# Lowest Price Challenge
If you find this product anywhere at lower cost than us. Call us and we will not only match the price but also give a complimentary coupon
100% Original Products
Shop with assurance, as each product we offer is 100% original, ensuring quality and authenticity with every purchase
RIGOL DP2000 Series Programmable Linear DC Power Supply | DP2031
Model
Number of Channels
Total Power
Output per Channel
Programming Resolution
Display Resolution
Readback Resolution
Specifications
| Country of Origin | India |
|---|---|
| Display | 4.3-inch LCD color touch screen |
| Brand | Rigol |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -40 to 60 °C |
| Humidity | 5% to 80% RH |
| Altitude | Less than 1500 m |
| Model | DP2000 Series |
| IP Rating | IP20 |
| Weight | 9.95 kg |
| Channels | 3 fully isolated independent channels |
| Dimensions (W × H × D) | 239 × 157 × 419 mm |
| Protection | Over Voltage, Over Current, Over Temperature |
| Product Condition | New |
| MPN | DP2000 Series |
| Max Input Power | 650 VA |
| Total Output Power | 222 W |
| CH1 Output Voltage | 0 to 32 V |
| CH2 Output Voltage | 0 to 32 V |
| CH3 Output Voltage | 0 to 6 V |
| CH1/CH2 Output Current | 0 to 3 A |
| CH3 Output Current | 0 to 5 A |
| Optional CH3 Output Current (High Current Mode) | 0 to 10 A |
| Series Mode Maximum Voltage | 64 V |
| Parallel Mode Maximum Current | 6 A |
| Programming Accuracy (CH1/CH2 Voltage) | 0.03% + 8 mV |
| Output Ripple (Voltage) | Less than 350 μVrms / 2 mVpp |
| Minimum Dwell Time | 1 ms |
| Arbitrary Waveform Points | 512 |
| Transient Response Time | Less than 50 μs |
| AC Input Voltage | 100/120/220/230 ±10% V |
| Rack Mount Form Factor | 3U, 1/2-rack |
| Energy Analysis | Timing output & consumption analysis |
Key Features
Rigol DP2000 Series Programmable Linear DC Power Supply for precise laboratory, R&D, and electronics testing applications.
- Triple output channels with full isolation for versatile testing.
- Delivers up to 222 W total output power and up to 32 V/3 A (CH1/CH2) and 6 V/5 A (CH3).
- Advanced accuracy with 0.03% + 8 mV programming accuracy and low output ripple below 350 μVrms.
- Supports arbitrary waveform generation with 512-step memory and 1 ms minimum dwell time.
- USB, LAN, RS232, and Digital I/O remote interfaces for enhanced connectivity.
- High-resolution touch screen interface for intuitive operation.
- Transient response time under 50 μs for dynamic loads.
- Includes over-voltage, over-current, and over-temperature protection mechanisms.
- Series and parallel mode operation for flexible output configurations.
- Energy consumption analysis and timing output features for advanced analysis.
Product Description
The RIGOL DP2000 Series Programmable Linear DC Power Supply, available as the DP2031 model, delivers stable, low-noise, and high-precision DC power for electronic design, device validation, IoT testing, automotive electronics, production testing, and automated test equipment. With three fully isolated programmable channels and a maximum total output power of 222 W, the RIGOL DP2031 supports simultaneous testing of multiple devices and circuits.
Channels 1 and 2 provide adjustable outputs of 0–32 V and 0–3 A, while Channel 3 provides 0–6 V and 0–5 A, with an optional higher-current configuration where supported. The internal series and parallel modes allow users to increase the available voltage up to 64 V or current up to 6 A, providing greater flexibility for different testing requirements.
- Three fully isolated and independently programmable output channels
- Maximum total output power of 222 W
- CH1 and CH2 output: 0–32 V and 0–3 A
- CH3 output: 0–6 V and 0–5 A
- Series operation supports output voltage up to 64 V
- Parallel operation supports output current up to 6 A
- Programming accuracy up to 0.03% + 8 mV
- Low output ripple below 350 μVrms
- Fast transient response of less than 50 μs
- Front and rear output terminals for flexible installation
- Built-in 512-step arbitrary waveform generation
- Minimum waveform dwell time of 1 ms
- Integrated energy-consumption and timing analysis
- Overvoltage, overcurrent, and overtemperature protection
- 4.3-inch LCD touchscreen for convenient configuration and monitoring
- USB Host, USB Device, LAN, RS232, and digital I/O connectivity
- Suitable for benchtop, rack-mounted, and automated testing applications
The RIGOL DP2031 Programmable Linear DC Power Supply is suitable for circuit prototyping, semiconductor testing, battery and power-management evaluation, embedded-system development, component ageing tests, manufacturing quality control, laboratory research, and electronics education. Its accurate output, low ripple, programmable sequences, and remote-control interfaces make it a reliable power source for sensitive electronic devices and automated testing workflows.
Available Model: DP2031
Dimensions: 239 × 157 × 419 mm
Weight: Approximately 9.95 kg
Explore more RIGOL programmable DC power supplies and professional laboratory testing instruments in the EnvMart Measuring & Testing Instruments category.
Looking to purchase in bulk?
- Purchase item in bulk quantity
- Get best price for your business
Frequently Asked Questions
The Rigol DP2000 Series provides a total output power of 222 W across three fully isolated channels.
CH1 and CH2 can deliver 0 to 32 V and 0 to 3 A, while CH3 can provide 0 to 6 V and 0 to 5 A, with an optional high current mode of 0 to 10 A.
The programming accuracy is 0.03% + 8 mV for CH1 and CH2, ensuring high precision for your applications.
It supports USB, LAN, RS232, and Digital I/O interfaces for enhanced connectivity and integration into automated systems.
Yes, the DP2000 Series includes over-voltage, over-current, and over-temperature protection mechanisms to safeguard your equipment.
The transient response time is less than 50 μs, making it suitable for applications requiring rapid load switching.
Yes, the DP2000 Series can be configured for series mode up to 64 V or parallel mode up to 6 A, providing versatile output options.
The operating temperature range is from 0 to 40 °C, while storage temperature can be between -40 to 60 °C.
The dimensions are 239 mm × 157 mm × 419 mm (W × H × D) and it weighs 9.95 kg.
You can browse and purchase the Rigol DP2000 Series on our website. For further inquiries, feel free to contact our support team.
Related Products
Other Products from this brand
$913.76
$623.92
-31.72%
$1,721.61
$1,177.06
-31.63%
$1,972.94
$1,347.91
-31.68%
$5,211.90
$4,690.71
-10%
$709.11
$484.18
-31.72%
New
$1,111.23
$759.64
-31.64%
$5,204.31
$3,556.63
-31.66%
$12,205.63
$7,784.75
-36.22%
$1,129.19
$771.35
-31.69%
$2,080.65
$1,421.50
Save 31.68%
Tax included
Quantity
Global Payments 140+ Countries
Global Shipping Fedex/UPS/DHL/Aramex/
BlueDart/Delhivery/DP World
24/7 Customer Support Email/Chat/Telephonic Support
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent