Wireless Vibration Sensor WBS1

Name: Wireless Vibration Sensor WBS1
Brand: ROKADE
SKU: AAETC
Availability: InStock

₹1

Enquire Now

Tax included

Quantity

Specifications

Type	Li-ion
Weight	228 g
Capacity	750 mAh
Accuracy	+ / - 5% @ 150 Hz\| 1 g
Dimensions	41.8 x 69.4 mm
Mounting	M6 threaded hole
Protection	IP67
Operating Temperature	-30? ~ 70?
Humidity	0% to 95% relative humidity (RH)
Sensing element	Piezoelectric / Annual shear mode
Charging Time	1 - 2 hours
Frequency range	Vel & Disp (10 ~ 1\|000 Hz)\| Acc (2 ~ 5000Hz)
Signal	RMS\| Peak\| peak to peak\| Bearing status value
LED indicator	Red\| Green\| Blue
Frequency response	3dB 0.4 Hz - 10 KHz
ISO standard	compliance ISO 10816-3
Full scale	50 g
Signal-to-Noise ratio	Greater Than 80 dB
Explosion proof	Exib IIC T4 Ga
FFT resolution	6400 lines
Waveform type	WAcceleration\| Velocity\| Displacement\| Envelopeaveform type
Bearings condition	BCLess Than 1\| well\| 1
Measurement duration	3s typical (affected by distance & communication)
Vibration setup	Automatic definition of the measurements based on the machine class
Operating lifetime	more than 10 hours (Continuously)
Rechargable	with marching charger
Wireless protocol	Wifi point to point
Wireless Range	Upto 50 meters depending on the environment
Standard mobile system compatibility	Android
Sampling frequency	Max 25.6 Khz

Key Features

Multiple parameter collection- Support for multiple signal types: ACC, Vel, Disp, Env, BC, FFT, Time waveform
Wireless Signal acquistion Wireless communication range up to 50 meters (depending on field condition)
Ultra low power consumption 10 hours of operation on a single charge

Reference AAETC Category Vibration Sensors Brand ROKADE

Product Details

Wireless Vibration Sensor (WBS1) is a handheld single-axis piezoelectric wireless accelerometer that runs on Android Mobile / Tab. The ROKADE WBS1 is a wireless ultra-low noise accelerometer with a bandwidth of 10 kHz, which outperforms most conventional accelerometers in particular.