Drger X-am  2500 Multi-Gas Detector (02, LEL, H2S, CO)BenefitsMatrix display X-am 2500 has a large, easy-to-read, liquid-crystal display. All gas readings are shown simultaneously and resized automatically depending on the number of sensors installed. When a gas alarm occurs, the reading for the sensor in the alarm will be highlighted and will alternate with the alarm level indication of A1 or A2. High-capacity battery Drger X-am 2500 can operate for more than 12 hours with either alkaline batteries or with rechargeable NiMH batteries. Depending on the requirements, the batteries can be charged either in the workshop or in a vehicle. Operating time without an Ex sensor installed is typically more than 250 hours. X-dock compatibility X-am 2500 is compatible with Drgers X-dock testing and calibration station. X-dock is Drgers new solution for efficient maintenance and comprehensive equipment management. Used for functional testing and complete documentation, X-dock can complete bump tests in 8 to 15 seconds with more than 40% less gas consumption than competitors using several 500 550 mL/min of gas flow.1 The X-am 2500 is also compatible with the Drger Bump TestStation.Long-lasting, reliable sensor technology innovative, catalytic Ex sensor has a high degree of drift stability with high resistance to silicone and hydrogen sulfide. The sensor boasts an expected service life of more than five years and is extremely sensitive to flammable gases and vapors. Further, the X-am 2500 is approved for measuring from methane to nonane, according to IEC/EN 60079-29-1. Zone 0 approved Drger X-am 2500 has Ex approval for zone 0 for user safety in areas subject to explosion hazards. Additionally, it is not sensitive to electromagnetic radiation, e.g. from wireless devices and is water and dust resistant in accordance with protection class IP 67

• Easy maintenance