Environmental Test Chamber 1000 Liter

Name: Environmental Test Chamber 1000 Liter
Brand: EnvMart
SKU: ABZGH
Availability: InStock

₹1

Enquire Now

Tax included

Quantity

Specifications

Brand	Wist
Capacity	1000 L
Model Name/Number	WT34CLM-S/ WT34CLM-G
Temperature range	40 to 150 deg C
Temperature Accuracy	1 deg C
Temperature Sensor	PT-100 RTDClass A
Temperature Control	Microprocessor-Based PID Control with Auto-Tune
Construction	Double Walled with PUF Insulation Provided
Humidity range	40% To 98% RH
Cooling	Condenser with Motor and Relay
Air Circulation	Flange Motor With Impeller/Blower
Trays	Heavy Duty SS Wire Mesh
Heating	U Shaped Nichrome Wire Heater in SS Sheathing
Chamber Illumination	Fluorescent Light With Door Switch
Tray Size	760 x 760 mm
Humidity accuracy	0.03
Internal Chamber Size	1500 x 800 x 800 mm
External Chamber Size	2135 x 960 x 1290 mm
Number of trays	5

Key Features

Condition compressor unit Complete with blowers, circulation motors, dry heater, humidity system, evaporation (cooling) coil, and standby cooling coil (if applicable).
1 No. Access Port Hole, 75mm dia. with Silicone Closure, on side wall 300X 300mm 5 Pane Viewing window, with illumination; Trays SS304 Removable Loading Tray Strip heaters in the door and window assembly Door Interlock, Drain for Condensing Water Low Noise Design ( Noise absorbing material installed in the Compressor Compartment )

Reference ABZGH Category Environmental Test Chambers

Product Details

Forced air circulation is done to maintain uniformity throughout the equipment. It is through circulation motors & blowers. The motors are mounted on the body from the outside and the only shaft is in the inner chamber. For safety dissimilar metals are used for rotating parts. The shaft and surrounding body are of SS; Blower is of Aluminum. Additionally, rotating parts are safeguarded with a guard grill.Humidity is by steam injection. The humidity system consists of a reservoir tank & humidifier tank, which is fitted with two nos The reservoir tank consists of a float valve to maintain the water level. It has to be connected to a continuous supply of soft water (preferably DM water). The reservoir tank consists of a safety float switch to detect the water level & give an alarm upon low water level. A safety float switch is also provided in the boiler tank to detect the water level & given an alarm upon low water level as well as cut off the supply to the heaters