ConCalHandheld - Handheld Auto Ranging Conductivity/TDS/C Analyzer Supplied with Conductivity Cell K=1.0 with Connector, Temperature Probe, Carrying Case, Rechargeable Battery, DC Adaptor, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card. (Supplied without Electrode Stand)Technical Specification:Conductivity Range : 0 - 20.00, 20 - 200.0, 200 - 2000S/cm, 2 - 20.000, 20 - 200 mS/cmConductivity Resolution : 0.001, 0.01, 0.1 S/cm & 0.001, 0.01 mS/cmTDS Range : 0 to 10, 100, 1000, 10000, 100000 ppmTDS Resolution : 0.001, 0.01, 0.1 ppm & 0.001, 0.01 ppt (1ppt=1000ppm)Temperature Range : 0.0 to 130.0CTemperature Resolution : 0.1CTemperature Compensation : Auto / ManualTemperature Coefficient : 0-10.000 % per C (Adjustable)Temperature Calibration : In-built software and can be calibrated by usersNumber of Range : OneCalibration Standard : OneCalibration Factor : OneSuitable Cell Constant : 1.0 & 0.1 KAdjustable Cell Constant : 0.90 to 1.1 K  Conductivity to TDS Conversion : 0.40000 to 1.00000 (Adjustable Factor)Reading : Conductivity at actual temperature and at 25C and TDS with scrolling Display.Error Messages : Wrong Standard / Cell, Cell Short, Cell Open, Try Upper Range, Try Lower Range & Temperature Probe Error.Display : 16 x 2 Line Alphanumeric Backlit LCDKeypad : Membrane waterproof polycarbonate soft touch keypad compliance to UL/ROHSCalibration Data Storage: Non-Volatile Memory which can store & view calibration cell constant, calibration range, standard conductivity solution, measured conductivity at 25C, actual temperature, calibration factor, etc.

• Power Supply : Rechargeable Battery With Charger