Vertical autoclave(RSI/VA-95)

Name: Vertical autoclave(RSI/VA-95)
Brand: EnvMart
SKU: AAMNL
Availability: InStock

₹96,906

₹71,366 Save ₹25,540

Enquire Now

Tax included

Quantity

Specifications

Model	RSI/VA-95
Working Pressure	1.2 kgf/cm sq.g (15 psi - 17 psi) (Can be Upgraded up to 30 PSI)
LOAD	4.00 KW
Power Supply	220 Volts / 440 Volts
Inner Chamber	304 SS (316 / 316L grades Stainless Steel Optional)
Outer Chamber	Mild Steel (304 stainless Steel Optional)
Digital Timer	0 to 99 min
Insulation	Glass Wool
Construction	Double / Triple Wall and SS GMP Construction
Safety Features	Radial locking\| safety valve\| low water detector and pressure interlock
Optional Accessories	- PID Controller - Low/high water cut-off device - Digital alarm - temperature recorder - dot matrix printer - RS 232/USB PC connection port - NABL authentication - Stainless Steel Wire Mesh Carrier - Dressing drums - Sterilization indicator tape - Autoclave bag - PLC control system - IQ / OQ / PQ Documentation
Chamber dimension	18 x 24
Sterilization Time	25 to 30 Minutes
Sterilizing Temperature	121C to 134C (150C - Optional)
Internal Tank Capacity	95 Liter
Heat Average	Less Than Equal to 1C
Door / Lid	Lift with foot protection and interlock device
Door Locking type	Radial Type (Wing Nut Optional)
Water Filling & Removal	Manual
Waste Container	Stainless Steel
No.of Drums & Sizes	2 (12 x 15)

Key Features

Internal and External Chamber, SS Made from grade 304
Bucket / basket made of stainless steel
Water Level Indicators
Closing via radial locking system
The seal of lid by Neoprene rubber gasket
The lid is applied with pressure gauge, spring loaded safety valve.

Reference AAMNL Category Autoclave

Product Details

RICO Vertical autoclave: Standard models of Vertical Autoclave units manufactured by RICO are available with chamber versions of 22 liters to 175 liters, which accommodate two and three drums accordingly. These systems are designed to meet effective sterilization requirements in bacteriological and research laboratories, hospitals and clinics and food and beverage units. The vertical chamber design maximizes space usage, while the microprocessor control system enables the machine to operate comfortably at all times.Vertical steam sterilizers are also called, our vertical type autoclaves provide flexible solutions of steam sterilization in hospitals, clinics and other areas of application, where reliable steam sterilization is a compulsory process. Vertically designed cells also guarantee safe and efficient sterilization in limited locations. Consistent with the specific application, these units have been fully fabricated as GMP stainless steel double and triple wall construction; Apart from this, we also produce vertical autoclaves with other configurations, including the interior and exterior of stainless steel made from Mild Steel (MS).