$23.16
$20.22
Tax included
Previous
Next
Share
Free Delivery in India | Lowest Global Shipping Charges
24/7 Customer Support
Shop with confidence knowing that our 24/7 Customer Support is always available to assist with any inquiries
Save up to 28% with GST Input
Avail maximum benefits from input tax mechanism on all your Business Invoices. Get GST Invoices on your business purchases. And 0% Taxes on all worldwide deliveries
# Lowest Price Challenge
If you find this product anywhere at lower cost than us. Call us and we will not only match the price but also give a complimentary coupon
100% Original Products
Shop with assurance, as each product we offer is 100% original, ensuring quality and authenticity with every purchase
Fluke Three Phase Power Energy Monitor & Logger 16-bit Resolution USB WiFi Bluetooth ±(0.2%+0.01%) Accuracy FLUKE-1732/EUS
Specifications
| Country of Origin | Romania |
|---|---|
| Resolution | 16 bit |
| Accuracy | ± (0.2 % + 0.01 %) |
| Display Type | LCD |
| Brand | Fluke |
| Battery Life | 5h |
| Battery type | Li-ion Rechargeable Battery |
| Height | 198mm |
| Length | 167mm |
| Model | FLUKE-1732/EUS |
| IP Rating | IP50 |
| Width | 55mm |
| Maximum Operating Temperature | 50°C |
| Minimum Operating Temperature | -10°C |
| Measurement Parameters | THD Current, Current, Voltage, Frequency, THD Voltage |
| Interface Type | USB, USB Mini-Port, WiFi, Bluetooth |
| Standards/Approvals | IEC 61010-1, IEC 61010-2-031:CAT IV 600 V/CAT III 1000, VEMC: EN 61326-1: Industrial CISPR 11: Group 1Class APower: IEEE 1459Korea (KCC): Class A EquipmentUSA (FCC): 47 CFR 15 subpart BIP50 in accordance with EN60529 |
| Minimum Measurement | 100 V |
| Maximum Measurement | 500 V |
| Standards/Approvals IEC 61010-1, IEC 61010-2-031 | CAT IV 600 V/CAT III 1000, VEMC: EN 61326-1: Industrial CISPR 11: Group 1Class APower: IEEE 1459Korea (KCC): Class A EquipmentUSA (FCC): 47 CFR 15 subpart BIP50 in accordance with EN60529 |
| Fluke -1730 Energy Monitor & LoggerBrand | Fluke |
Key Features
- Provides 16-bit resolution synchronous sampling for precise waveform capture.
- Measures up to 500 V and supports wide current ranges for varied circuits.
- Certified IEC 61010 CAT IV 600 V / CAT III 1000 for service-entrance use.
- Features Rogowski/clamp auto-detection for rapid probe setup.
- Enables flexible data transfer via Wi-Fi, Bluetooth, and USB interfaces.
- Internal flash memory allows extended logging sessions up to eight weeks.
- Operates from measured circuits or internal Li-ion rechargeable battery with 5-hour life.
- Ideal for load studies, energy assessments, power logging, and harmonic analysis.
Product Description
Fluke FLUKE-1732/EUS three phase power energy monitor and logger delivers high accuracy of ±(0.2%+0.01%) and supports measurement parameters including THD Current, Current, Voltage, Frequency, and THD Voltage. It is designed for industrial use and onsite analysis with multiple interfaces: USB, USB Mini-Port, WiFi, and Bluetooth for seamless data transfer.
This device includes 16-bit resolution synchronous sampling for accurate waveform capture and measures voltages up to 500 V with wide current ranges, making it suitable for various circuits. It meets stringent safety standards including IEC 61010 CAT IV 600 V / CAT III 1000 V, ensuring safe use at service entrances.
The monitor features Rogowski clamp auto-detection to facilitate rapid probe setup and is equipped with internal flash memory capable of storing up to ten logging sessions each lasting up to eight weeks at 1-minute intervals for detailed energy monitoring.
The monitor is ideal for performing load studies to assess circuit capacity and peak loads, conducting energy assessments before and after efficiency upgrades, and quantifying kWh and demand for electrical systems.
Additionally, it supports auxiliary sensors for environmental data correlation such as temperature or pressure, and is effective for monitoring power factor and analyzing voltage-current total harmonic distortion (THD).
Provides 16-bit resolution synchronous sampling for precise waveform capture. Measures voltage up to 500 V with wide current ranges. Complies with IEC safety standards for CAT IV 600 V / CAT III 1000 V ratings. Supports wireless data transfer via WiFi and Bluetooth alongside USB options.
Internal flash memory stores extended logging sessions up to 8 weeks at 1-minute intervals. Operates on internal Li-ion rechargeable battery with 5-hour battery life and under 6-hour charging. Suitable for load studies, facility energy assessments, and power quality analysis.
Supports auxiliary sensors for correlated environmental monitoring.
This energy monitor and logger is an essential tool in industrial, manufacturing, commercial, and utility environments for energy management and analysis. Comprehensive data collection facilitates informed energy efficiency improvements and equipment load monitoring.
Explore more Data Loggers and measurement instruments at EnvMart for professional energy management solutions by leading brands like Fluke.
Looking to purchase in bulk?
- Purchase item in bulk quantity
- Get best price for your business
Frequently Asked Questions
This model has an accuracy of ±(0.2% + 0.01%).
It can measure voltages from a minimum of 100 V up to a maximum of 500 V.
The dimensions are 198 mm in height, 167 mm in length, and 55 mm in width.
It supports USB, USB Mini-Port, WiFi, and Bluetooth interfaces for data transfer.
The operating temperature range is from -10°C to 50°C.
It complies with IEC 61010 CAT IV 600 V / CAT III 1000 V safety standards.
The internal flash memory allows for extended logging sessions up to eight weeks at 1-minute intervals.
It features an LCD display type.
It provides a resolution of 16 bits for precise waveform capture.
Related Products
Other Products from this brand
$23.16
$20.22
Save 12.7%
Tax included
Quantity
Global Payments 140+ Countries
Global Shipping Fedex/UPS/DHL/Aramex/
BlueDart/Delhivery/DP World
24/7 Customer Support Email/Chat/Telephonic Support
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent