This sensor is designed to attach directly to any solar panel. When placed on the center back side of the panel, it accurately measures the temperature of the panel.Select a PV module that remains un-shaded throughout the day. Prior to installation of the PV temperature sensor       onto the PV panel, the installation area of the panel back should be thoroughly cleaned until it is greaseless, dry, and dust-free. This cleaning will ensure a good bond between sensor and panel and allow for accurate panel temperature readings. Affix the module temperature sensor to the panel back using the thermally conductive adhesive provided. Press the sensor firmly against the surface. Do not attempt to extend or shorten the pre-assembled 2m cable. Tie the sensor cable off in a way that does not pull on the sensor.

• Onsite two point calibration
• Loop powered