This powerful, concentrated, no rinse quaternary sanitizer can be used on most pre-cleaned hard surfaces. It can be used as spray and wipe, with a mop and bucket or in a third sink sanitizing application. When used as directed it provides 200ppm of QUAT so it can be used on food contact surfaces without the need for rinsing.This specially formulated Hard Surface Sanitizer contains carefully selected, safe and biodegradable ingredients. The super-safe formula contains plant based, biodegradable surfactants and a natural acidic cleaner.Applications:Medi ClinicsBathroomsRestaurantsUsage:For water safe surfaces:Prepare a 200ppm active sanitizing solution manually or using a dispenser (1 part product: 500parts water; 2 ml product in 1 liter water)Spray the solution on surface to be sanitized. (No rinse required with a 200ppm solution)Wait a minimum of 1 minute before wipingFor sanitizing utensils and containers:Pre-wash and rinse dishes as usual.Make 200ppm solution, immerse the utensils in it for 1-2 minutes depending on sanitary requirements.Drain and air dry. (No rinse required if 200ppm solution has been used)Change the solution when it appears dirty.For Mold, Mildew and Fungi:Prepare 660ppm solution by diluting 1 part of product into 150 parts of water.Spray directly on the surface, wipe clean after 10min. (ALWAYS WASH FOOD CONTACT SURFACES WITH WATER)Apply every week.For Small flies in drain:Prepare 660ppm solution by diluting 1 part of product into 150 parts of water.Pour 350ml of the solution into each drain during night or down times. Use 1-2 times per week.For Floor sanitizing:The product can be used while cleaning the floor with Ultra Neutral Floor Cleaner.Make 10,000ppm solution by diluting 1 part of product into 10 parts of water.Take 100ml solution into mop bucket with 4L water.