Biogas Digester Capacity 20 Kg To 1000 Tons, A biogas digestor uses natural anaerobic decomposition of organic matter under controlled conditions. The digestor is usually a large, sealed container for the organic matter eg manure from livestock or poultry, green waste from agriculture, sewage or food waste.The digester uses CSTR Technology (Constant Stirring Type Reactor)The Digester (Fixed dome/ Floating dome) is made from Mild Steel (TATA, JINDAL, SAIL, BHUSHAN)/ RCC/ Glass Fused Tank. Additional structure is given to increase the strength and life of digester.3.5 mm FRP coating inside the digester and 1.5 mm FRP coating is done  outside the digester to have thermal insulation and long life.PUF coating can also be done in extreme temperature variance areas.HRT is 30 to 35 days i.e. the material feed today comes out through overflow after 30-35 days with average temperature of 35 400 C throughout the year.8% - 10% solid content is maintained inside the digester for maximum output.Internal heating system (Heat recovered from Genset) is also used to maintain digester temperature if needed.Mixing Pattern: Mixers should ensure the Precise Maintenance of Different Digestion Zones (Hydrolysis, Acidogenesis, Acetogenesis and Methanogenesis) inside the DigesterThe digester uses CSTR Technology (Constant Stirring Type Reactor)The Digester (Fixed dome/ Floating dome) is made from Mild Steel (TATA, JINDAL, SAIL, BHUSHAN)/ RCC/ Glass Fused Tank. Additional structure is given to increase the strength and life of digester.3.5 mm FRP coating inside the digester and 1.5 mm FRP coating is done  outside the digester to have thermal insulation and long life.PUF coating can also be done in extreme temperature variance areas.HRT is 30 to 35 days i.e. the material feed today comes out through overflow after 30-35 days with average temperature of 35 400C throughout the year.8% - 10% solid content is maintained inside the digester for maximum output.Internal heating system (Heat recovered from Genset) is also used to maintain digester temperature if needed.Mixing Pattern: Mixers should ensure the Precise Maintenance of Different Digestion Zones (Hydrolysis, Acidogenesis, Acetogenesis and Methanogenesis) inside the Digester.