Product Name
Hanna | HI98199 | Multiparameter Portable pH/EC/DO Waterproof Meter
pH Range
0.00 to 14.00 pH
pH Calibration
automatic one, two, or three points of five standard buffers (pH 4.01, 6.86, 7.01, 9.18, 10.01) or one custom buffer
pH Temperature Compensation
yes
EC Resolution
1 S/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm
EC Accuracy
1.5% of reading or 2 S/cm whichever is greater
EC Calibration
automatic single-point, with six standard solutions (84 S/cm, 1413 S/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm) or custom point
TDS Range
0.0 to 200.0 ppt (g/L) (the maximum value depends on the TDS factor)
TDS Resolution
1 ppm (mg/L); 0.001 ppt (g/L); 0.01 ppt (g/L); 0.1 ppt (g/L); 1 ppt (g/L)
TDS Accuracy
1% of reading or 1 ppm (mg/L) whichever is greater
TDS Calibration
based on conductivity calibration
EC/TDS Temperature Compensation
yes
Temperature Correction Coefficient
0.00 to 6.00 %/C
EC to TDS Conversion Factor
0.00 to 1.00
Reference Temperature
25 C or 20 C
EC/TDS Multi-range Measurement Modes
yes
Salinity (PSU) Range
0.00 to 70.00 PSU
Salinity (PSU) Resolution
0.01 PSU
Salinity (PSU) Accuracy
2% of reading or 0.01 PSU whichever is greater
Salinity (PSU) Calibration
based on conductivity calibration
Salinity (Seawater Sigma) Range
0.0 to 50.0 st, s0, s15
Salinity (Seawater Sigma) Resolution
0.1 st, s0, s15
Salinity (Seawater Sigma) Accuracy
1 st, s0, s15
Salinity (Seawater Sigma) Calibration
based on conductivity calibration
Resistivity Range
0 to 999999 Ocm; 0 to 1000.0 kOcm; 0 to 1.0000 MOcm
Resistivity Resolution
1 Ocm; 0.1 kOcm; 0.0001 MOcm
Resistivity Calibration
based on conductivity calibration
Dissolved Oxygen Measurement Type
galvanic
Dissolved Oxygen Range
0.0 to 500.0%; 0.00 to 50.00 ppm (mg/L)
Dissolved Oxygen Resolution
0.1%; 0.01 ppm (mg/L)
Dissolved Oxygen Accuracy
0.0 to 300.0%
Dissolved Oxygen Calibration
automatic one or two points at 0, 100% or one custom point
Dissolved Oxygen Temperature Compensation
yes
Barometric Pressure Compensation
yes
Salinity Compensation
yes
Temperature Range
-5.00 to 55.00 C; 23.00 to 131.00 F; 268.15 to 328.15 K
Temperature Resolution
0.01 C; 0.01 F; 0.01 K
Temperature Accuracy
0.15 C; 0.27 F; 0.15 K
Temperature Calibration
automatic at one custom point
Temperature Compensation
automatic from -5 to 55 C (23 to 131 F)
Logging Type
continuous logging or log-on-demand
Logging Memory
45000 records
Logging Interval
one second to three hours
Connectivity
via USB-C with Hanna software
Automatic Shut-Off
Not used (disabled), 5, 10, 15, 20, 30, 60 minutes
Calibration Timeout Reminder
yes
Battery Type/Life
1.5V AA batteries (4) / approximately 400 hours of continuous use without backlight (50 hours with backlight)
Environment
0 to 50 C (32 to 122 F); RH 100%
Dimensions
185.0 x 93.0 x 35.2 mm (7.3 x 3.6 x 1.4)
Ordering Information
HI98199 is supplied with the HI829113 pH digital probe with 4m (13) cable, pH calibration solution sachets, PC software, micro USB cable, batteries, quality certificate, and instruction manual in a rugged carrying case.
Atmospheric Pressure Range
450 to 850 mmHg; 17.72 to 33.46 in Hg 600.0 to 1133.2 mbar; 8.702 to 16.436 psi 0.5921 to 1.1184 atm; 60.00 to 113.32 kPa
Atmospheric Pressure Resolution
0.1 mmHg; 0.01 in Hg; 0.1 mbar; 0.001 psi; 0.0001 atm; 0.01 kPa
Atmospheric Pressure Accuracy
3 mmHg within 15 C from the temperature during calibration
Atmospheric Pressure Calibration
automatic at one custom point