aqbot-ch4-monitor-single-point-continuous-methane-monitor-4797

In Stock

AQBot CH4 Monitor-Single Point Continuous Methane Monitor

Name: AQBot CH4 Monitor-Single Point Continuous Methane Monitor
Brand: Oizom
SKU: AAHCN
Availability: InStock

₹250,001

₹115,228 Save ₹134,773

Enquire Now

Tax included

Quantity

Specifications

Accuracy	Less Than 5%FS (at 205C/ 5020%RH)
Power Supply	AC 90VAC- 265VAC 50/60Hz
Power Consumption	3.5 W (average)
Analog Output	1 x 4~20mA Current Loop with 12-bit Resolution
Sensor life	2 years
Memory	2GB RAM\| 8GB eMMC ROM
Relay outputs	2 programmable relays\| volt free relay contacts (1NO\| 1 NC)
Warm up time	1 hour (cold start) for gas monitoring
Processor	Quad-Core ARM Cortex A-72
Internal Data Storage	Up to 12 months
Device Interface	On-device software\| API\| Display
Display Specification	6 digit 7 Segment Display
Gas sample mode	Natural diffusion
Response Time (T90)	Less Than 60 Seconds
Signal refresh rate	5 Seconds
Wireless Communications	Global 2G/3G/4G\| LoRa\| LTE\| NB-IoT\| Sigfox\| Wifi (Any one)
Wired Communications	Ethernet\| MODBUS TCP\| MODBUS RTU\| RS-485\| CANbus (Any one)
Beacon/sounder	Built-in\| RED flashing light with alarm sounder 95db @ 1m
Wiring connections	Pre-wired supplied with 2m cable

Key Features

On Device Display: Built-in display module to check on-site concentration
Ultimate Durability: NEMA Certified industrial-grade enclosure made of high-grade engineering composite polymers
Weatherproof: IP65 grade enclosure for endurance against harsh environmental conditions
Accurate measurement: Accurate CH4 gas measurement with NDIR technology
Compact: Light-weight and the compact system can be easily installed on any wall, pole, or structure
Real-Time Data: Continuous monitoring and real-time data transfer at configurable intervals

Reference AAHCN Category Gas Leak Detector Brand Oizom

Product Details

The AQBot CH4 is a robust CH4 Gas Monitor that can measure methane levels in the air. This CH4 gas detector uses NDIR technology to measure CH4 concentration in the air. The industrial methane monitor is equipped with a nondispersive infrared absorption (NDIR) sensor. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh weather.The AQBot enclosure is NEMA 4X approved to last long in harsh industrial environments. It comes with an on-device display to check CH4 concentration without being dependent on any external display. This fixed methane gas detector comes with an optional on-device alarm siren and strobe-light for quick action in case of any atmospheric hazard. It provides an early warning to potential toxic gas exposure.The AQBot CH4 monitor can accurately monitor CH4 gas concentrations in real-time. This industrial air quality monitor can integrate relevant CH4 sensor modules as per the application requirement.This industrial methane monitor is lightweight and easy to install on the wall or pole with versatile mounting arrangements. It can easily integrate with existing building monitoring or plant control systems infrastructure.The NDIR CH4 sensor module is easy to replace or calibrate by sending the device back to Oizom or our partner facility.The single-point continuous gas monitoring system AQBOT can communicate over multiple communication protocols. Multiple CH4 monitor networks can receive output signals to a central point after configuration. Also, it has a built-in relay module, through which the user can set up a relevant threshold to trigger the Alarming system. Thresholds for the alarm are customizable from the Air Quality Software, which comes with AQBot CH4 monitor.ID-OZCH4_1 PARAMETER- METHANE (CH4) RANGE- 500-1500 PPM RESOLUTION- 1 PPM

Built-in Relay: Built-in relay for better process automation
Wired Communications: Supports all industry-standard output signals like Modbus, Canbus, RS-485, RS-283
Wireless Communications: Supports a wide range of wireless connectivity options like GSM / WiFi / LoRa / NBIoT
Over-The-Air Update: Automatically upgradeable from a central server without any onsite visit (available for wireless connectivity)