$69.50
Tax included
Previous
Next
Share
Free Delivery in India | Lowest Global Shipping Charges
24/7 Customer Support
Shop with confidence knowing that our 24/7 Customer Support is always available to assist with any inquiries
Save up to 28% with GST Input
Avail maximum benefits from input tax mechanism on all your Business Invoices. Get GST Invoices on your business purchases. And 0% Taxes on all worldwide deliveries
# Lowest Price Challenge
If you find this product anywhere at lower cost than us. Call us and we will not only match the price but also give a complimentary coupon
100% Original Products
Shop with assurance, as each product we offer is 100% original, ensuring quality and authenticity with every purchase
Labtron LAJI-C20 Air Jacketed CO₂ Incubator
Specifications
| Display | Digital Color display with touch panel |
|---|---|
| Brand | Labtron |
| Power | 1500 W |
| Voltage (V) | 220V 50Hz |
| Interface | RS485 |
| Model | LAJI-C20 |
| Temperature Sensor | PT 100 |
| Gross Weight | 91 kg |
| Temperature Control Range | 4 - 65°C |
| Amplitude | 20 mm |
| Temperature Uniformity | ±0.5°C |
| Controller | PID |
| Humidity Resolution | 0.001 |
| CO2 Range | 0 - 20% |
| Heating Method | 6 side heating |
| Timing Range | 0 to 99 hours 59 min |
| CO2 Sensor | IR CO₂ sensor |
| Temperature Control Accuracy | ±0.1°C |
| Interior Dimension (W×D×H) | 505 × 600 × 420 mm |
| Shelf | 1 |
| Shaking Frequency | 40 - 300 rpm |
| CO₂ Uniformity | ±0.1% |
| CO₂ recovery time | (Return to 5% after opening the door for 30 seconds) ≤3 mins |
| CO₂ control accuracy | ±0.1% |
| CO₂ stability of 5% CO₂ | ±0.1% |
| Shaking Precision | ±1 rpm |
| Drive way | Three eccentric shaft balance drive type |
| Humidity control | 50 to 90% |
| 37°C humidity control accuracy | The chamber can reach 85%-95% when 37°C / and the humidity can be controlled in real time |
| Humidity deviation | ±2% |
| Related humidity | Nature vaporate Greater than 95% |
| Allowable shaking load | 10 kg |
| Environment temperature detector | Independent |
| Over temperature protection system | Independent |
| Temperature recover time | (Return to 37°C after opening the door for 30 sec) ≤8 mins |
| Disinfection method | 90°C high temp |
| Platform size (L×B) | 350 × 350 mm |
| Sterilization system | 90-degree high temp / high humidity sterilization system (RHP) - UV sterilization (option) |
| Door Open/Close message | Yes |
| Exterior dimension (W×D×H) | 693 × 875 × 753 mm |
| Flask Configuration | 50 ml×36 / 100 ml×23 / 250 ml×13 / 500 ml×8 / 1 L×5 / 2 L×3 / 4 L×1 / 5 L×1 |
Key Features
- Touch screen interface with Screen lock while functioning
- Infrared CO2 concentration sensor with PT100 temperature sensor
- Outer door ring with heating function
- Independent environment temperature detector
- UV lamp at the back top of the chamber
- 90-degree high temperature and high humidity sterilization system with One touch simple sterilization function
- Short sterilization cycle (18 hours) with 72 hours machine performance
- Heating elements: Located on all 6 sides of the chamber
- Alarm system: High and low temperature, over temperature, chamber sensor failure, independent temperature limiter, door open, high/low CO2 condensation, power off alarm, door temperature sensor failure, disinfection and sterilization status reminder, over temperature sensor failure, and abnormal function
- Data logging capabilities with PID controller
- Designed to minimize contamination
Product Description
Air Jacketed CO₂ Incubator LAJI-C20 is a shaking CO₂ incubator with air-jacketed configurations, suitable for heat and UV sterilization. It operates within a temperature range of 4°C to 65°C with a shaking frequency of 40 to 300 rpm. Designed with a CO₂ concentration sensor, an advanced alarm system, and a temperature control and monitoring system, it ensures uniform and stable conditions. Incorporating a 90°C high-temperature sterilization method, a touchscreen with a PID controller, and enhanced safety features, it provides the benefits of contamination control and uncompromising temperature uniformity for even the most demanding incubations.
Applications:
Air jacketed CO₂ incubators are used for tissue engineering, cell culture, in vitro fertilization, diagnostics, neuroscience, cancer research, and developing biosensors across medical research and the pharmaceutical industry.
Alarm system:High and low temperature and over temperature - Chamber sensor failure - Independent temperature limiter - Door open - High/low CO₂ condensation - Power off alarm - Door temperature sensor failure - Disinfection and sterilization status reminder - Over temp sensor failure and Abnormal function
Related Products
Other Products from this brand
Previous
Next
Share
Free Delivery in India | Lowest Global Shipping Charges
24/7 Customer Support
Shop with confidence knowing that our 24/7 Customer Support is always available to assist with any inquiries
Save up to 28% with GST Input
Avail maximum benefits from input tax mechanism on all your Business Invoices. Get GST Invoices on your business purchases. And 0% Taxes on all worldwide deliveries
# Lowest Price Challenge
If you find this product anywhere at lower cost than us. Call us and we will not only match the price but also give a complimentary coupon
100% Original Products
Shop with assurance, as each product we offer is 100% original, ensuring quality and authenticity with every purchase
Labtron LAJI-C20 Air Jacketed CO₂ Incubator
Specifications
| Display | Digital Color display with touch panel |
|---|---|
| Brand | Labtron |
| Power | 1500 W |
| Voltage (V) | 220V 50Hz |
| Interface | RS485 |
| Model | LAJI-C20 |
| Temperature Sensor | PT 100 |
| Gross Weight | 91 kg |
| Temperature Control Range | 4 - 65°C |
| Amplitude | 20 mm |
| Temperature Uniformity | ±0.5°C |
| Controller | PID |
| Humidity Resolution | 0.001 |
| CO2 Range | 0 - 20% |
| Heating Method | 6 side heating |
| Timing Range | 0 to 99 hours 59 min |
| CO2 Sensor | IR CO₂ sensor |
| Temperature Control Accuracy | ±0.1°C |
| Interior Dimension (W×D×H) | 505 × 600 × 420 mm |
| Shelf | 1 |
| Shaking Frequency | 40 - 300 rpm |
| CO₂ Uniformity | ±0.1% |
| CO₂ recovery time | (Return to 5% after opening the door for 30 seconds) ≤3 mins |
| CO₂ control accuracy | ±0.1% |
| CO₂ stability of 5% CO₂ | ±0.1% |
| Shaking Precision | ±1 rpm |
| Drive way | Three eccentric shaft balance drive type |
| Humidity control | 50 to 90% |
| 37°C humidity control accuracy | The chamber can reach 85%-95% when 37°C / and the humidity can be controlled in real time |
| Humidity deviation | ±2% |
| Related humidity | Nature vaporate Greater than 95% |
| Allowable shaking load | 10 kg |
| Environment temperature detector | Independent |
| Over temperature protection system | Independent |
| Temperature recover time | (Return to 37°C after opening the door for 30 sec) ≤8 mins |
| Disinfection method | 90°C high temp |
| Platform size (L×B) | 350 × 350 mm |
| Sterilization system | 90-degree high temp / high humidity sterilization system (RHP) - UV sterilization (option) |
| Door Open/Close message | Yes |
| Exterior dimension (W×D×H) | 693 × 875 × 753 mm |
| Flask Configuration | 50 ml×36 / 100 ml×23 / 250 ml×13 / 500 ml×8 / 1 L×5 / 2 L×3 / 4 L×1 / 5 L×1 |
Key Features
- Touch screen interface with Screen lock while functioning
- Infrared CO2 concentration sensor with PT100 temperature sensor
- Outer door ring with heating function
- Independent environment temperature detector
- UV lamp at the back top of the chamber
- 90-degree high temperature and high humidity sterilization system with One touch simple sterilization function
- Short sterilization cycle (18 hours) with 72 hours machine performance
- Heating elements: Located on all 6 sides of the chamber
- Alarm system: High and low temperature, over temperature, chamber sensor failure, independent temperature limiter, door open, high/low CO2 condensation, power off alarm, door temperature sensor failure, disinfection and sterilization status reminder, over temperature sensor failure, and abnormal function
- Data logging capabilities with PID controller
- Designed to minimize contamination
Product Description
Air Jacketed CO₂ Incubator LAJI-C20 is a shaking CO₂ incubator with air-jacketed configurations, suitable for heat and UV sterilization. It operates within a temperature range of 4°C to 65°C with a shaking frequency of 40 to 300 rpm. Designed with a CO₂ concentration sensor, an advanced alarm system, and a temperature control and monitoring system, it ensures uniform and stable conditions. Incorporating a 90°C high-temperature sterilization method, a touchscreen with a PID controller, and enhanced safety features, it provides the benefits of contamination control and uncompromising temperature uniformity for even the most demanding incubations.
Applications:
Air jacketed CO₂ incubators are used for tissue engineering, cell culture, in vitro fertilization, diagnostics, neuroscience, cancer research, and developing biosensors across medical research and the pharmaceutical industry.
Alarm system:High and low temperature and over temperature - Chamber sensor failure - Independent temperature limiter - Door open - High/low CO₂ condensation - Power off alarm - Door temperature sensor failure - Disinfection and sterilization status reminder - Over temp sensor failure and Abnormal function
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent