Thermostatic Water Bath: The temperature range of the water bath is from few degree C. above room temperature to 100 deg. C with an accuracy of 0.5 deg. C. This bath is suitable for the Washer man, Kolmer and Khan Test inactivation, Paraffin Embedding and many other applications in the laboratories.The bath is constructed double walled inside, made of Stainless Steel and outside of Mild Steel Sheet duly painted with epoxy powder coated provided with 25 mm mineral wool insulation on five sides.The Temperature is controlled by a Hydraulic type thermostat from few C above ambient to 100 deg. C sensitivity of plus minus 0.5 Heating element are made of copper Nickel plated tabular type and approximately extend the full length of the bath. Control panel is provided at lower portion of the bath consisting of two neon pilot lights which indicates control cycles as well as the mains heater switch, temperature control knob. The bath is complete with perforated and removable diffuser shelves. Stainless Steel cover, brass drain plug, cord with plug to work on 220/230 volts A.C. but without rack and thermometer.